top_left_rounded oem_systems_company top_right_rounded
in_wall_speakers_and_home_theater_products
white_bar_left
gray_bar_right
above_search_area
IW-303
Speaker Selectors
 


IW-303 Speaker A or B or A+B Switch



FEATURES
Speaker Switcher "Push-button" operation

This plate will install in stadard "J" box with included screws. Use CL wiring. Refer to a technician if in doubt about specific wiring diagrams for various applications.

Plate & Buttons are 94V-0 Flame Retardant Plastic

Lifetime Limited Warranty


DOWNLOADS
 

SPECIFICATIONS
Power Handling:
100W with 8 ohm speakers
50W with 4 ohm speakers

Mounting Dimensions:
Depth: 2.3" (59mm)
Height: 2.4" (61mm)
Width: 1" (25mm)

Fits standard
decora openings

Available Colors:
White: IW-303 / Almond : IW-303a /Ivory: IW-303i
 

WIRE & WIRING NOTES:
A) Wiring to and from switch should be "CL-2 or CL-3" rated. Use 16 gauge or larger for runs in excess of 100 feet.

B) Strip ¼" off each wire. Ensure all strands are twisted together and inserted into respective terminals.

C) For 12 gauge and larger wire, trim some of the strands off to enable them to fit into the terminals.

D) Perform initial testing of selector at low volume level to prevent damage to equipment.